User Contributed MET/CAL PROCEDURE ============================================================================= INSTRUMENT: Sub HP 54503A: Offset Accuracy Test IEEE DATE: 26-Jan-94 AUTHOR: User Contributed REVISION: 1.0 ADJUSTMENT THRESHOLD: 70% NUMBER OF TESTS: 13 NUMBER OF LINES: 161 CONFIGURATION: Fluke 5700A ============================================================================= STEP FSC RANGE NOMINAL TOLERANCE MOD1 MOD2 3 4 CON 1.001 ASK+ B X 1.002 ASK- R N P J F W 1.003 5700 * S # 1.004 HEAD [27][91]1m{Channel 1 Offset Accuracy Test} 1.005 DISP Use a banana-to-BNC adapter to connect a BNC cable 1.005 DISP from the 5700A to the UUT channel 1 input connector.[7] # Reset the UUT 1.006 IEEE :MENU CHAN;*RST;*RST # Select 500mV/Div, 20 Volt Offset 1.007 IEEE :VIEW CHAN1;:CHAN1:RANG 4;:CHAN1:OFFS 20 # Press offset key, Go to local 1.008 IEEE :SYST:KEY 13;:SYST:KEY 39 1.009 5700 20V S 2W 1.010 DISP Readjust so the trace is as close to the 1.010 DISP horizontal center line of the graticule as possible 1.010 DISP after it has settled(averaging complete).[7] 1.011 IEEE :CHAN1:OFFS?[I];:CHAN1:OFFS?[I] 1.012 MEME 1.013 MEMC V 0.180U # 2.001 IEEE :CHAN1:RANG 1.6;:CHAN1:OFFS 9;:SYST:KEY 13;:SYST:KEY 39 2.002 5700 9V S 2W 2.003 DISP Readjust so the trace is as close to the 2.003 DISP horizontal center line of the graticule as possible 2.003 DISP after it has settled(averaging complete).[7] 2.004 IEEE :CHAN1:OFFS?[I];:CHAN1:OFFS?[I] 2.005 MEME 2.006 MEMC V 0.077U # 3.001 IEEE :CHAN1:RANG .8;:CHAN1:OFFS 5;:SYST:KEY 13;:SYST:KEY 39 3.002 5700 5V S 2W 3.003 DISP Readjust so the trace is as close to the 3.003 DISP horizontal center line of the graticule as possible 3.003 DISP after it has settled(averaging complete).[7] 3.004 IEEE :CHAN1:OFFS?[I];:CHAN1:OFFS?[I] 3.005 MEME 3.006 MEMC V 0.041U # 4.001 HEAD [27][91]1m{Channel 2 Offset Accuracy Test} 4.002 DISP Use a banana-to-BNC adapter to connect a BNC cable 4.002 DISP from the 5700A to the UUT channel 2 input connector.[7] # Reset the UUT 4.003 IEEE :MENU CHAN;*RST;*RST # Turn off channel 1, select channel 2, turn on channel 2 4.004 IEEE :BLAN CHAN1;:SYST:KEY 10;:VIEW CHAN2 # Select 500mV/Div, 20 Volt Offset, Press offset key, Go to local 4.005 IEEE :CHAN2:RANG 4;:CHAN2:OFFS 20;:SYST:KEY 13;:SYST:KEY 39 4.006 5700 20V S 2W 4.007 DISP Readjust so the trace is as close to the 4.007 DISP horizontal center line of the graticule as possible 4.007 DISP after it has settled(averaging complete).[7] 4.008 IEEE :CHAN2:OFFS?[I];:CHAN2:OFFS?[I] 4.009 MEME 4.010 MEMC V 0.180U # 5.001 IEEE :CHAN2:RANG 1.6;:CHAN2:OFFS 9;:SYST:KEY 13;:SYST:KEY 39 5.002 5700 9V S 2W 5.003 DISP Readjust so the trace is as close to the 5.003 DISP horizontal center line of the graticule as possible 5.003 DISP after it has settled(averaging complete).[7] 5.004 IEEE :CHAN2:OFFS?[I];:CHAN2:OFFS?[I] 5.005 MEME 5.006 MEMC V 0.077U # 6.001 IEEE :CHAN2:RANG .8;:CHAN2:OFFS 5;:SYST:KEY 13;:SYST:KEY 39 6.002 5700 5V S 2W 6.003 DISP Readjust so the trace is as close to the 6.003 DISP horizontal center line of the graticule as possible 6.003 DISP after it has settled(averaging complete).[7] 6.004 IEEE :CHAN2:OFFS?[I];:CHAN2:OFFS?[I] 6.005 MEME 6.006 MEMC V 0.041U # 7.001 HEAD [27][91]1m{Channel 3 Offset Accuracy Test} 7.002 DISP Use a banana-to-BNC adapter to connect a BNC cable 7.002 DISP from the 5700A to the UUT channel 3 input connector.[7] # Reset the UUT 7.003 IEEE :MENU CHAN;*RST;*RST # Turn off channel 1, select channel 3, turn on channel 3 7.003 IEEE :BLAN CHAN1;:SYST:KEY 10;:SYST:KEY 10;:VIEW CHAN3 # Select 500mV/Div, 20 Volt Offset, Press offset key, Go to local 7.004 IEEE :CHAN3:RANG 4;:CHAN3:OFFS 20;:SYST:KEY 13;:SYST:KEY 39 7.005 5700 20V S 2W 7.006 DISP Readjust so the trace is as close to the 7.006 DISP horizontal center line of the graticule as possible 7.006 DISP after it has settled(averaging complete).[7] 7.007 IEEE :CHAN3:OFFS?[I];:CHAN3:OFFS?[I] 7.008 MEME 7.009 MEMC V 0.180U # 8.001 IEEE :CHAN3:RANG 1.6;:CHAN3:OFFS 9;:SYST:KEY 13;:SYST:KEY 39 8.002 5700 9V S 2W 8.003 DISP Readjust so the trace is as close to the 8.003 DISP horizontal center line of the graticule as possible 8.003 DISP after it has settled(averaging complete).[7] 8.004 IEEE :CHAN3:OFFS?[I];:CHAN3:OFFS?[I] 8.005 MEME 8.006 MEMC V 0.077U # 9.001 IEEE :CHAN3:RANG .8;:CHAN3:OFFS 5;:SYST:KEY 13;:SYST:KEY 39 9.002 5700 5V S 2W 9.003 DISP Readjust so the trace is as close to the 9.003 DISP horizontal center line of the graticule as possible 9.003 DISP after it has settled(averaging complete).[7] 9.004 IEEE :CHAN3:OFFS?[I];:CHAN3:OFFS?[I] 9.005 MEME 9.006 MEMC V 0.041U # 10.001 HEAD [27][91]1m{Channel 4 Offset Accuracy Test} 10.002 DISP Use a banana-to-BNC adapter to connect a BNC cable 10.002 DISP from the 5700A to the UUT channel 4 input connector.[7] # Reset the UUT 10.003 IEEE :MENU CHAN;*RST;*RST # Turn off channel 1, select channel 4, turn on channel 4 10.003 IEEE :BLAN CHAN1;:SYST:KEY 10;:SYST:KEY 10 10.004 IEEE :SYST:KEY 10;:VIEW CHAN4 # Select 500mV/Div, 20 Volt Offset, Press offset key, Go to local 10.005 IEEE :CHAN4:RANG 4;:CHAN4:OFFS 20;:SYST:KEY 13;:SYST:KEY 39 10.006 5700 20V S 2W 10.007 DISP Readjust so the trace is as close to the 10.007 DISP horizontal center line of the graticule as possible 10.007 DISP after it has settled(averaging complete).[7] 10.008 IEEE :CHAN4:OFFS?[I];:CHAN4:OFFS?[I] 10.009 MEME 10.010 MEMC V 0.180U # 11.001 IEEE :CHAN4:RANG 1.6;:CHAN4:OFFS 9;:SYST:KEY 13;:SYST:KEY 39 11.002 5700 9V S 2W 11.003 DISP Readjust so the trace is as close to the 11.003 DISP horizontal center line of the graticule as possible 11.003 DISP after it has settled(averaging complete).[7] 11.004 IEEE :CHAN4:OFFS?[I];:CHAN4:OFFS?[I] 11.005 MEME 11.006 MEMC V 0.077U # 12.001 IEEE :CHAN4:RANG .8;:CHAN4:OFFS 5;:SYST:KEY 13;:SYST:KEY 39 12.002 5700 5V S 2W 12.003 DISP Readjust so the trace is as close to the 12.003 DISP horizontal center line of the graticule as possible 12.003 DISP after it has settled(averaging complete).[7] 12.004 IEEE :CHAN4:OFFS?[I];:CHAN4:OFFS?[I] 12.005 MEME 12.006 MEMC V 0.041U # 13.001 DISP Remove all connections from the UUT. 13.002 5700 * S 13.003 IEEE :MENU CHAN;*RST;*RST;:SYST:KEY 39 13.004 END